Asus Pedestal/5U Rackmount Server TS500-E5 - Manual (Page 93)

ASUS TS500-E5 5-21
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
Configure Win627EHF Super IO Chipset
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Serial Port2 Mode [Normal]
OnBoard LAN1 Boot ROM [Enabled]
OnBoard LAN2 Boot ROM [Enabled]
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
5.4.4 Onboard Device Configuration
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port2 base address.
Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Mode [Normal]
Allows you to select the mode for Serial Port2.
Configuration options: [Normal] [IrDA] [ASK IR]
IR I/O Pin Select [SINB/SOUTB]
This item appears only when you set the Serial Port2 Mode item to [IrDa] or
[ASK IR] and allows you to select the receiver or transmit pin for Serial Port2.
Configuration options: [SINB/SOUTB] [IRRX/IRTX]
IR Duplex Mode [Half Duplex]
This item appears only when you set the Serial Port2 Mode item to [IrDa] or
[ASK IR] and allows you to select Full or Half Duplex for Serial Port2.
Configuration options: [Full Duplex] [Half Duplex]
Onboard LAN1/2 Boot ROM [Enabled]
Allows you to do the LAN Boot ROM configuration.
Configuration options: [Disabled] [Enabled]
Allows BIOS to Enable
or Disable Floppy
Controller.