Allied Telesis AT-MC116XL - Manual (Page 35)

AT-MC115XL and AT-MC116XL Installation Guide
25
! 1 RFI Emission EN55022 Class B
! 2 Warning: In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate
measures.
! 3 Immunity EN55024
! 4 Warning: This product requires shielded cables to comply with emission
and immunity standards. If it is used with unshielded cables, the user may
be required to take measures to correct the interference problem at their own
expense.
! 5 Electrical Safety TUV-EN60950, UL60950 (UL/cUL)
! 6 Laser/LED EN60825
! 7 This is a “Class 1 LED Product”
! 8 Warning
Electrical Shock Hazard: To prevent electrical shock, do not remove the
cover. There are no user-servicable parts inside. The unit contains
hazardous voltages and should only be opened by a trained and qualified
technician.
Safety
! 9 Lightning Danger
Danger: Do not work on equipment or cables during periods of lightning
activity.
! 10 Power to the hub must be sourced only from the adapter.
USA/Canada
Use a UL Listed/CSA Certified AC adapter of DC 12V, minimum 500 mA
Europe - EU
Use TÜV licensed AC adapter of DC 12V, minimum 500 mA.
UK
Use a UK Safety Approved AC adapter of DC 12 V, minimum 500 mA.
! 11 Caution
Pluggable Equipment: The socket outlet should be installed near the
equipment ans should be easily accessible
! 12 Caution
Air vents: The air vents must not be blocked on the unit and must have free
access to the room ambient air for cooling.
! 13 Operating Temperature: This product is designed for a maximum
ambient temperature of 40 degrees C.
! 14 All Countries: Install product in accordance with local and National
Electrical Codes.