Swiftech FS020 ALL MODELS - Manual (Page 14)

Swiftech Inc., 1703 E. 28
th
St., Signal Hill, CA 90755 T. (562) 595-8009 F. (562) 595-8769
Subject to change without notice - 14 -
In summary
Draining the system:
Insert fill and bleed tubes into valves 1 and 3.
Close valve 2
Plunge tube from valve 3 into an empty container.
Open valves 1 and 3.
Clean off the extremity of tube from valve one and blow into it to flush the liquid out. Do not use compressed air to perform this operation, as it
could damage your pump.