Acro, Wing type – Spektrum SPM7800 DX7S User Manual

Page 13

Advertising
background image

13

SPEKTRUM DX7s • RADIO INSTRUCTION MANUAL

EN

Frame Rate

The Frame rate function supports 22ms and 11ms. Default is
22ms. Change to 11ms when a 11ms Frame rate receiver is
used with compatible servos. The 11ms fast frame rate is not
compatible with some types of analog servos, so the 22ms rate
may be required.

Wing Type

Use the Wing Type Screen to select wing and tail types to match
your airplane model. Diagrams show the servo setups with the
named types. Available wing and tail types are shown in the
screenshot illustrations below.

Select wing and tail types before doing other programming such
as Servo Setup (Travel, Sub-Trim and Reverse), D/R and Expo,
Flap System, Differential or Mixing.
V-Tail and Elevon Wing selections may require attention to Servo
Setup Reverse to make model respond correctly to controls. See
Appendix for more recommendations.

ACRO

NOTICE: Refer to your airplane manual for recommended control throws.

CAUTION:

Always do a Control Test of your model with the transmitter after programming to make sure

your model responds as desired.

Advertising