Aiwa DINA Z-A60 - Manual (Page 10)

10
ENGLISH
BASIC OPERATIONS
MULTI
JOG
CD
DISC
DIRECT
PLAY 1-3
DISC
CHANGE
0-9, +10
DISC
DIRECT
PLAY 1-3
CD EDIT/
CHECK
SHIFT
f , g
c
s
a
s
z OPEN/
CLOSE
a
c
LOADING DISCS
Press CD, then press z OPEN/CLOSE to open the
disc compartment. Load disc(s) with the label side
up.
To load one or two discs, place the disc(s) on tray 1 and 2.
To load three discs, press DISC CHANGE to rotate the trays
after placing two discs. Place the third disc on empty tray 3.
Close the disc compartment by pressing
z OPEN/CLOSE.
PLAYING DISCS
Load discs.
To play all discs in the disc compartment, press c .
All discs are played once.
To play one disc only, press DISC DIRECT PLAY 1-3.
The selected disc is played once.
To stop play, press s .
To pause play, press a . To resume play, press again.
To search for a particular point during playback, keep f
or g pressed and release the button at the desired point.
To skip to the beginning of a track during playback, turn
MULTI JOG or press
f or g repeatedly.
To remove discs, press z OPEN/CLOSE.
To start play when the power is off (Direct Play Function)
Press CD. The power turns on and play of the loaded disc(s)
begins.
When
z OPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened.
To check the remaining time
During play (except random play or programmed play), press
CD EDIT/CHECK on the remote control while pressing SHIFT.
The amount of time remaining until all tracks finish playing is
displayed. To restore the playing time display, repeat the above.
CD PLAYING
Number of track
being played
Elapsed playing time
Selecting a track with the remote control
1 Press one of DISC DIRECT PLAY 1-3 to select a disc.
2 Press numbered buttons 0-9 and +10 to select a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1 Press DISC CHANGE.
2 Remove the discs and replace with other discs.
3 Press
z OPEN/CLOSE to close the disc compartment.
NOTE
• When loading an 8-cm (3-inch) disc, make sure to place it onto
the inner circle of the tray precisely.
• Do not place more than one compact disc on one disc tray.
• Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
• When transporting the unit, remove the discs from the trays.
• Do not use irregular shape CDs (example: heart-shaped,
octagonal ones). It may result in malfunctions.
• The unit may not play a CD-R/RW disc that is recorded on
personal computers or some kinds of CD-R/RW recorders
because of differences in recording platforms.
• Do not attach any seal or label to either side (the recordable
side or the labeled side) of a CD-R/RW disc. It may cause
malfunction.
RANDOM/REPEAT PLAY
Use the remote control.
RANDOM PLAY
All the tracks on the selected disc or all the discs can be played
randomly.
REPEAT PLAY
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT while pressing SHIFT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play — RANDOM lights up on the display.
REPEAT play —
" lights up on the display.
RANDOM/REPEAT play — RANDOM and " light up on
the display.
Cancel — RANDOM and
" disappear from the display.
To play all discs, press c to start play.
To play a single disc, press one of DISC DIRECT PLAY 1-3 to
start play.
During random play it is not possible to skip to the previously
played track with
f .