Setting power economizing mode, Demo (demonstration) – Aiwa DINA Z-A60 User Manual

Page 6

Advertising
background image

6

ENGLISH

SETTING POWER ECONOMIZING MODE

CLOCK

1

2,4

3

When you set power economizing mode to “ECO ON” or “ECO
AUTO”, the unit reduces power consumption by conducting four
ECO operations as follows.
• The unit (all the illumination of the display and the buttons)

blacks out when the power is turned off. Only the red indicator
lights up.
If the clock is not set, the unit does not black out. Instead, the
DEMO will begin when the power is turned off.

• The illumination of the display brighten for 10 seconds only

when you press a button, or turn VOLUME or MULTI JOG.
If the display dimmer mode is set to “DIM-OFF”, the brightness
of the illumination does not change.

• The display dimmer mode is set to the dimmest, the button

illumination lights off, and the volume is set to the minimum (0)
when the unit turns on by timer recording.

• The unit automatically turns itself off if you do not use it for 10

minutes. (only when “ECO AUTO” is selected)
The unit does not turn itself off if there is audio input signal
through VIDEO/AUX/PHONO IN jacks when the function is
VIDEO/AUX/PHONO.

1 Press ECO once.

“ECO MODE” will be displayed.

2 Press ENTER within 4 seconds.

The current power-economizing mode status will be displayed.
If the power-economizing mode is off: ECO OFF
If the power-economizing mode is on: ECO AUTO or ECO
ON

3 Turn MULTI JOG within 4 seconds to switch the

power-economizing mode.

Example: When “ON” is selected

4 Press ENTER within 4 seconds to set the mode.

Standby power consumption

If the power-economizing mode is OFF: 30 W
If the power-economizing mode is ON/AUTO: 0.9 W

NOTE

To view the clock when all the display lights turn off, press CLOCK
so that the time is displayed for 4 seconds.

DEMO (DEMONSTRATION)

DEMO

POWER

f

,

g

s

c

When the AC cord is plugged into an AC outlet for the first time
after purchase, the DEMO will begin in the display. When the
power is turned on, the DEMO will end.
Until the clock is set, the DEMO will automatically begin whenever
the power is turned off.

You can enjoy two kinds of DEMO modes on this unit.
One is demo, the other one is game demo.
In the demo mode, colorful illumination demonstrates on the
display.
In the game demo mode, you can play a game.
See below about how to play the game.
To switch the two modes to each other, when the unit is in off
mode, press POWER while pressing DEMO.

To deactivate or activate DEMO

Press DEMO to turn on or off the DEMO mode.

To play the game Demo

1 Press

c

c

c

c

c

.

Three numbers on the display start to run.

2 Press

s

s

s

s

s

once.

The number on the left side stops.

3 Press

s

s

s

s

s

twice to stop the remaining two numbers.

Scoring:
20 points are given to start the game.
If all the numbers are equal, 50 points are added to the score.
If not equal, one point is subtracted.
If the gained points reach 9999, you win.
If the gained points fall to 0, you lose.

To reset the game DEMO, press DEMO twice. The game
starts again.
To cancel the game DEMO, press DEMO.

To change the probability of equalizing the three numbers

Press

f

or

g

repeatedly to select one of the three probability

levels when playing the game Demo. The tray number indicator
in the display changes between 1 and 3. As the tray number
increases from 1 to 3, the higher the probability of equalizing.

1

2

3

NOTE

• During the game Demo,

c

,

f

,

g

and

s

are available

only for the game Demo. Cancel the game Demo to use these
buttons for the functions such as CD playing, etc.

• During the game Demo, some indicators unrelated with the

actual operation light up on the display.

• During recording, DEMO is not operative.

Advertising