Nikon 995 - Manual (Page 18)

34 35
Setting Date/Time
The date and time for your country or location should be set before
use.
1 Set the Mode dial to and press the MENU button to display
the SET-UP menu.
2 Select “Date” in the SET-UP menu.
• Press ≤/≥ on the Multi selector (p. 44) to highlight Date and press > to
display date/time setting. The year display flashes.
3 Set year, month, day, hour and minute.
• Pressing ≤ on the Multi selector increases the number and pressing ≥
decreases the number. After setting a number, pressing > moves the
selection on.
Year <— Month <— Day <— Hour <— Minute <— Date display sequence
• The year display can be set between 1970 to 2037.
Prepar
ation
4 Set the date display order.
• Press ≤/≥ on the Multi selector to change the date display order as
followings.
YYYY/MM/DD MM/DD/YYYY DD/MM/YYYY
5 Complete the date and time setting.
• Press > on the Multi selector after selecting the desired date display order to
complete date/time setting. When the date display order is set, the clock
starts and the display returns to the SET-UP menu.
Printing image date/time with a photo
When date and time are set, image date and time are recorded with the image
data (inside the image file) and can be displayed when the image is played back
(p. 74). The image date and time can be printed with the photo (p. 144).
Backup battery of the clock
The clock-calendar is powered by a separate rechargeable battery, which is
charged as necessary when the main battery is installed. If the camera has
been stored with the main battery removed for a long period of time, the clock
may need to be reset. Once the main battery has been reinserted, the clock
battery will recharge in several hours, during which time the main battery should
be left in the camera.
COOLPIX995 (E) 01.5.30 0:38 PM Page 34