Nikon 995 - Manual (Page 54)

107 106
Normal Normal setting
Wide Adapter Wideangle Converter setting
Telephoto 1 2x Telephoto Converter TC-E2 setting
Telephoto 2 3x Telephoto Converter TC-E3ED setting
Fisheye 1
Fisheye Converter setting
(Records a circular image.)
Fisheye 2
Fisheye Converter setting (The corners of
the rectangular image are included in
image.)
Slide Copy Adptr Slide Copy Adapter setting
LENS
Optional lens converters for wideangle, telephoto and fisheye photography
can be used with the COOLPIX995. A Slide Copy Adapter is also available.
Each of these converter is adapted to a particular combination of settings,
such as the Focus mode, Zoom position and Metering method.
Setting Shooting Menus
—continued Shooting Mode
Option Button locked Focal length Zooming
Wide Adapter *1 Widest angle Enabled after setting
Telephoto 1 *1 Maximum telephoto Enabled after setting
Telephoto 2 *1 Maximum telephoto Enabled after setting
Fisheye 1* 2 * 3 * 4 Widest angle Disabled
Fisheye 2 * 3 * 4 Middle Disabled
Slide Copy Adptr* 5 * 3 * 4 Macro Enabled after setting
*1 The built-in Speedlight is set to Flash Cancel. Only an optional external Speedlight can be fired.
*2 The Focal length is fixed to infinity, the metering system to Center-Weighted and the range of
selectable apertures is limited.
*3 The Self-timer can be set.
*4 Both the built-in Speedlight and any optional external Speedlight are set to Flash Cancel.
*5 Less contrast is set for Image Adjustment and compensation of +0.7 EV is set. This can be
changed after the setting is made.
Swivel Lock
The Swivel Lock function, prevents the lens section of the
camera from being unintentionally swiveled beyond the
horizontal position by the weight of an optional lens
converter.
Slide the Swivel Lock lever in the direction of the arrow
to activate the Swivel Lock function and lock the lens
section of the camera so that it cannot be rotated more
than 90° forward (vertical position).
— Slide Copy Adapter —
Select Slide Copy Adptr when the camera is attached to a Slide Copy
Adapter to copy a 35mm type color slide film or check the images on
negative film.
Positive Setting for color slide film
Inverse Color Setting for negative film
Notes: Lens setting
• The built-in Speedlight does not fire when the Lens settings is set to Fisheye
1, Fisheye 2 or Slide Copy Adptr. The Flash Cancel fi indication is
displayed on the Control panel and Monitor.
• Refer to the instruction manual for the optional lens converter or Slide Copy
Adapter for details.
• The Lens setting indication is displayed on the
Monitor when a Lens setting other than Normal
is selected.
• When Fisheye 1 is selected, the Infinity √ and
Center-Weighted Metering indications are
also displayed on the Monitor.
• When Slide Copy Adptr is selected, the Macro
v and Less Contrast indications are also
displayed on the Monitor.
Inverse color mode
• Bright lighting is required in Inverse Color mode when checking negative film
on a Slide Copy Adapter. If the lighting is insufficient, the image on the Monitor
appears too bright. If the image is affected by noise (interference), set the
Image Sharpening to Off or Low (p. 114).
• Inverse Color mode is only intended for checking negative film, and Image
quality varies significantly depending on the type or manufacturer of the film
being used. To obtain high-quality images, use of a film scanner such as the
Nikon COOLSCAN is recommended.
Menus
COOLPIX995 (E) 01.5.30 0:42 PM Page 106