Basic operation (auto mode) – Nikon 995 User Manual

Page 25

Advertising
background image

49

Basic Operation (Auto Mode)

—continued

48

3

Lightly press the Shutter release button and confirm the focus.

Note: Continuous AF
When the Monitor is on, the camera continues to attempt to focus (Continuous
AF, p. 62). The shutter can be released without focus being achieved. Check
the focus status of the image in the Monitor before releasing the shutter.

Focus Lock
When the subject is in focus while you are lightly pressing the Shutter release
button, the focus is locked and the Green LED lights up without flashing. When
the main subject is not centered in the frame, focus on the subject, lock focus,
then recompose as you like while lightly pressing the Shutter release button. In
Focus Lock, do not change the distance between the camera and subject when
changing the composition.

In-focus

Out-of-focus

Green LED lights.

Green LED flashes

rapidly.

Green LED flashes at

intermediate speed

Bright subject

Dark subject

No LED indication

Red LED flashes

rapidly.

Confirm LED

4

Gently depress the Shutter release button.

• The shutter is released when the Shutter release button is fully depressed, the

camera beeps once (p. 127) and the picture is taken.

Monitor

• Immediately after a picture is taken, the Green LED flashes and

(Quick

delete) and

˚

(pause, p. 85) are briefly displayed in the Monitor after which

the Monitor will return to normal and the next shot can be taken.

• It is normally possible to take a picture when the shot is still being displayed

in the Monitor. Lightly pressing the Shutter release button resets the Monitor
to normal display and subsequent shots are possible unless

(Wait) is

displayed. The number of shots that can be taken may vary, depending on
the Image size and Image quality (p. 58).

Image size

Image quality

Number of shots that can be taken

FULL

NORMAL

4

VGA

BASIC

77

Note: Recording on CF Memory Cards
The Green LED flashing at intermediate speed indicates that the image is being
written to the CF memory card. Do not remove the card, battery or AC Adapter
until the Green LED has gone out, or image data may be damaged or not
recorded.

is displayed on the Monitor while image is being recorded on the CF

memory card.

Simple Shooting and Playback

COOLPIX995 (E) 01.5.30 0:38 PM Page 48

Advertising