Nikon 995 - Manual (Page 26)

51
Basic Operation (Auto Mode)
—continued
50
Built-in Speedlight
Use the built-in Speedlight if there is insufficient light to illuminate the subject.
This condition is indicated by the Red LED flashing rapidly when the Shutter
release button is half-pressed.
To use the Speedlight
Å Slide the Speedlight lock-release lever to release the built-in Speedlight.
Red LED steady.
Í Confirm the Red LED is steady, then gently depress the Shutter release
button fully to take the picture with the built-in Speedlight.
Red LED flashes
rapidly.
5 Press the QUICK button to check the image immediately
after shooting.
• Press the Multi selector to choose the image to be displayed.
To display the previous image frame continue to press < /≤.
When the oldest frame is reached, pressing < /≤ changes the display to the
most recent frame recorded.
When the most recent frame is reached, pressing ≥/ > changes the display
to the oldest one.
Check points:
• Lightly pressing the Shutter release button in either Quick review or Full-screen
review resets the camera to normal Shooting mode and more shots can be
taken.
• Recorded images can be played back in Full-frame playback (p. 74) by
rotating the Mode dial to ˘.
• Each press of the QUICK button changes the display on the Monitor as
follows:
Shooting mode
(take a picture)
Quick review mode
(Quick check of last
picture)
Full-screen review
mode
Note: Using built-in Speedlight
Note that the built-in Speedlight may become warm during extended Speedlight
use.
Quick review mode Full-screen review
mode
Simple Shooting and Playback
COOLPIX995 (E) 01.5.30 0:39 PM Page 50