Nikon 5700 - Manual (Page 23)

Getting Started—Getting to Know the COOLPIX5700
11
E The (Function) Button
By default, the button can be used to choose a User Set without access-
ing the camera menus. Press the button while rotating the command dial,
the selected User Set will appear in the top left of the monitor or viewfinder
(User Sets 1, 2, and 3 only). It will also appear in the control panel shutter-speed/
aperture display while the
button is pressed.
By default, the camera is set to the automatic “point-and-shoot” mode, User
Set A. Menu settings for User Sets 1, 2, and 3 are stored separately. You can
create combinations of settings for User Sets 1, 2 and 3, and switch instantly
from one combination of settings to the other simply by selecting the desired
User Set (
68).
In User Sets 1, 2, and 3, you can choose the function assigned to the but-
ton, making it possible to select the User Set or adjust white balance and
metering without accessing the camera menus, or to adjust flash and focus
mode without using the buttons on the camera (
129).
Setting assigned to button
User Set (default setting) 68
(Speedlight Mode)
White Balance
Metering
62
101
103
(Focus Mode) 53