Nikon 5700 - Manual (Page 37)

Taking and Reviewing Pictur
es—Basic Picture T
aking
25
Step 2—Select User Set A
The following steps assume the camera is in the au-
tomatic “point and shoot” mode, User Set A.
When you first use the camera, it will be set to User
Set A by default. If a , , or appears in the up-
per left corner of the monitor or viewfinder, the
camera is set to User Set 1, 2 or 3 respectively. For
details on setting the camera to User Set A, see
”Choosing a User Set“ (
68).
Step 3—Adjust Camera Settings (Optional)
In User Set A, you can use the , , , and buttons to control the
settings listed in the following table. The default settings, suitable for most
situations, are also shown below. Refer to the rightmost column page num-
bers for information on changing these settings. This section assumes that the
defaults are used.
Setting Default Description Control
Image size
Image
quality
NORMAL
Pictures compressed for
balance between quality
and file size that is ideal for
snapshots.
49
Focus mode Autofocus
Camera focuses automati-
cally at distances over
50 cm (1´8˝).
53
Flash mode Auto
Speedlight pops up and
fires automatically in poor
lighting.
62
FULL
Pictures are 2,560
×
1,920
pixels in size.
+ 51
Continuous
mode
Single
Camera records one pic-
ture each time shutter-re-
lease button is pressed.
104