ROTHENBERGER WALL CUT 6540 - Manual (Page 18)

16 ENGLISH
5 Care and Maintenance
Ensure the ventilation slits are never blocked and always clean.
Clean the motor regularly using compressed air.
Remove the cut-off wheels when work has been completed and clean the protective cover.
Replacing the carbon brushes: If the carbon brushes are due for replacement, the equipment
will shut down automatically. Unscrew the cover plate and replace the carbon brushes.
Important! All maintenance, overhauling and repair work must only be carried out by trained
specialised staff.
6 Accessories
Accessory Name ROTHENBERGER Part Number
Fine dry vacuum RODIA DRY Cleaner 1200 No. FF35148
Clamping set, complete No. FF53505
Transport case WALL CUT 6540 No. FF60101
Cut-off discs:
Professional RED Ø 230 mm No. FF11230
Professional BLACK Ø 230 mm No. FF12230
Professional BLUE Ø 230 mm No. FF13230
Professional GREEN Ø 230 mm No. FF16230
7 Customer service
The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using our service-after-
sales hotline:
Phone:
+ 49 (0) 61 95 / 800 – 8200
Fax: + 49 (0) 61 95 / 800 – 7491
Email: [email protected]
www.rothenberger.com
8 Disposal
Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly
disposal of the non-recyclable parts (e.g. electronic waste) please contact your local waste
disposal authority.
Old batteries can be taken to your specialist dealer who will dispose of them in conformity with
environmental regulations.
For EU countries only:
Do not dispose of electric tools with domestic waste. In accordance with European
Directive 2012/19/EC on waste electrical and electronic equipment and its
implementation as national law, electric tools that are no longer serviceable must be
collected separately and utilised for environmentally compatible recycling.