ROTHENBERGER ROWELD P 110 - Manual (Page 15)

ENGLISH 13
2 Technical Data
Welding range Ø (mm) .................................... 20 - 110
Pressure range ............................................... SDR series see welding parameter book
Max. traverse path (mm) ................................ 165
Heating element:
Power supply .................................................. 230V AC, 50/60Hz, 800W
Heating plate dimension (mm) ........................ 180 x 130
Protection / Protection class ............................ I / IP20
Weight (kg) ..................................................... 2,6
Weights:
Complete machine (kg) ................................... 11,3
Complete machine with transport box (kg) ...... 43,0
Dimensions:
Machine in transport box (mm). ...................... 540 x 345 x 355 (LxWxH)
3 Function of the Unit
3.1 Description
ROWELD P 110 is a compact, easy to handle and easy to transport heating plate butt fusion
plastic pipe welding machine. Welding joints on pipes made of PE-, PVDF- and PP with outer
Diameter of 20 to 110 mm can be produced with the machine safely.
The machine basically consists of:
Basic unit with bench mounting fixture, hand operated trimmer, electronically controlled heating
plate, main clamp set for pipe-to-pipe (110 mm) and left side fittings clamp (110 mm) for pipe to
fitting weldings, reduction clamping inserts, tools, table clamp and steel carrying case.
For precise welding of flanges and pre-fabrication a flange adaptor (Art.No.: 55199) is available
as an option.
3.2 Operating instructions
In accordance with national or EU ordinances and guidelines, e. g. DVS 2212,
Section I, only duly qualified and authorised personnel are allowed to operate the
ROWELD welding machines!
Only trained and authorised welders are allowed to operate the machine!
3.2.1 Putting into operation
Please read through the operating instructions and safety instructions atten-
tively before you put the butt fusion welding machine into operation!
Do not use the heating element in explosive environments or bring it into
contact with easily flammable materials!
 Either fasten the basic unit on a workbench by using the included screws or fasten it by us-
ing an existing vice.
 Fasten the table clamp on the workbench and put the heating element in it.
 Connect power plug to the power supply stated on the type plate.

The red diode “Stand by“ lights up. That is: there is a voltage being applied. Switch on the
heater element using the large pushbutton (lights up green) and select the desired tempera-
ture
(160°C to 285°C) using the “+“ or “-“ button.
Heating up of the heater element is displayed by a yellow diode on the heater element. A hori-
zontal bar also appears on the temperature indicator. The yellow diode goes out shortly before