Aastra Telecom MBU 400 41-001286-00 - Manual (Page 22)

22 Aastra MBU 400 User Guide
Getting Started
The message " Connecting... Please wait" appears on the handset, followed shortly
by the MBU status screen.
2. Scroll down to see the IP address and other MBU status information.
3. Press the red key to exit.
Note: If the MBU did not download a configuration file or did not receive an IP
address using DHCP, a Boot Status of "Failed" appears on the System Status page.
If your MBU 400 system is not using configuration files, for example, the Boot
Status will be "Failed" under normal operation.
Configuring Your Phone for First-Time Use
This section describes how to configure and set up your MBU 400 phone for first use.
If your MBU 400 System has been pre-configured by the Internet Telephony Service
Provider you purchased it from, the phone is ready for use once you have plugged in
all cables and connected the power. You can customize your phone using the
information provided in
Customizing Your Phone on page 30 .
The MBU 400 phone functions much like an ordinary analog telephone. However,
because it is connected to the Internet, you have to configure your phone before it is
ready for first use. The initial configuration may have already been done for you by
your System Administrator.
--Network--
MAC Address
00-08-7g-98-45-cf
IP address
192.345.43.54 (D)
Boot Status
Failed
--Gateway--
Version
Sw: 01:08 Hw: 1
Serial no.
255
Handset ID
0280000002340
--VoIP status--
VoIP register domain
Registration
SIP1:Registered
SIP2: Not registered
SIP3: Not registered
SIP4: Not registered
SIP5: Not registered
SIP6: Not registered
SIP7: Not registered
SIP8: Not registered
--EMS status--
EMS server
Registration
Failed
--RTP packets--
Received
No
System Status
IP Address
MAC Address
CLR CLR