Aastra Telecom MBU 400 41-001286-00 - Manual (Page 40)

40 Aastra MBU 400 User Guide
Customizing Your Phone
Changing Advisory Tones
Advisory tones warn you that something is about to happen or is happening. There are
three advisory tones you can enable or disable individually. By default all advisory
tones are enabled.
To set Advisory Tones on the handset do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings and press OK z.
3. Select Audio settings , and press OK z.
4. Select Advisory tones , and press OK z.
5. Select the type of tone you want to enable or disable by pressing the OK z key.
For available sounds, see the table below.
Enabling/Disabling Silent Mode
You can enable or disable a silent mode on the phone. When disabled, all ringer
melodies, tones, confirmation sounds, and advisory tones are disabled. To enable/
disable silent mode:
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings and press OK z.
3. Select Audio settings , and press OK z.
4. Select Silence , and press OK z.
5. Select Silent on to disable all sounds on the phone. Select Silent off to hear all
sounds as you use the phone.
6. Press OK z to save the setting.
Note: You can also enable or disable the silent mode from the idle screen by pressing
the “#” key, and pressing the
Silence on softkey or Silence off softkey as required.
Setting Your Phone to Vibrate
You can select from different vibrator modes which vibrates the phone with an
incoming call. You can choose between vibrating only, vibrating and then ringing,
and vibrating as well as ringing.
To set your phone to vibrate do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings and press OK z.
3. Select Audio settings , and press OK z.
4. Select Vibrator Mode , and press OK z.
Advisory Tone Meaning
Battery Alert The batteries must be recharged.
Range Tone The handset is out of range of the gateway.
Confirmation You have saved or deleted an entry, or made a selection.