Aastra Telecom MBU 400 41-001286-00 - Manual (Page 41)

Aastra MBU 400 User Guide 41
Customizing Your Phone
5. Select a vibration mode to use when your phone receives an incoming call. Valid
values are Vibrator off , Vibrate then ring , Vibrate only , Vibrate and ring .
6. Press OK z to save the setting.
Changing Emergency Line Settings
The default setting of emergency calls is over the landline (the LINE port on the
gateway). Check that you have a working landline connection for emergency calls. If
you are using VoIP calls exclusively you should change the emergency call setting to
a registered SIP account.
Note: It is recommended that you check with your System Administrator for the
method of routing emergency calls in your network.
To change the emergency line setting on your handset do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings and press OK z.
3. Select Telephony Settings , and press OK z.
4. Select Emergency line
5. Select from Landline , SIP1 , SIP2 , etc.
6. Press OK z for the change to take affect.
To make emergency calls:
• Enter the emergency number for your geographical location, and then press the
green key .
Note: Changing your primary line settings does not change your emergency line
setting.
R R