B changing engine oil, Changing engine oil, En glish – Karcher HDS 13-80 De Tr1 User Manual
Page 32
PERIODIC SERVICE
16
EN
GLISH
4. If the oil level is too low, remove the oil filler plug, and
add new oil to the prescribed level.
5. After adding oil, wait more than 5 minutes and check
the oil level again. It takes some time for the oil to drain
down to the oil pan.
Engine oil quantity
* 90 mm (3.54 in.) oil pan depth is optional.
Oil quantities shown are for standard oil pans.
A
Engine oil should be MIL-L-2104C or have properties
of API classification CF or higher.
Change the type of engine oil according to the
ambient temperature.
A
When using oil of different brands from the previous
one, be sure to drain all the previous oil before adding
the new engine oil.
B
Changing engine oil
To avoid personal injury:
A
Be sure to stop the engine before
draining engine oil.
A
When draining engine oil, place
some container underneath the
engine and dispose it according to
local regulations.
A
Do not drain oil after running the
engine. Allow engine to cool down
sufficiently.
1. Change oil after the initial 50 hours of operation and
every 200 hours thereafter. (See table below.)
A
Changing interval thereafter
* 90 mm (3.54 in) oil pan depth is optional.
**Standard replacement interval
A
API classification : above CF
A
Ambient temperature : below 35 C (95 F )
2. Remove the drain plug at the bottom of the engine,
and drain all the old oil. Drain oil will drain easier when
the oil is warm.
3. Add new engine oil up to the upper limit of the oil level
gauge.
Model
Oil pan depth
124 mm (4.88 in.)
*90 mm (3.54 in.)
D1503-M-E3
D1703-M-E3
D1803-M-E3
7.0 L
(1.85 U.S.gals.)
5.6 L
(1.48 U.S.gals.)
V2003-M-E3
V2203-M-E3
V2403-M-E3
V2403-M-T-E3
9.5 L
(2.51 U.S.gals.)
7.6 L
(2.01 U.S.gals.)
Above 25 C (77 F)
SAE30 or SAE10W-30
SAE15W-40
0 C to 25 C (32 F to 77 F)
SAE20 or SAE10W-30
SAE15W-40
Below 0 C (32 F)
SAE10W or SAE10W-30
SAE15W-40
Models
Oil pan depth
124 mm (4.88 in.) *90 mm (3.54 in.)
D1503-M-E3
D1703-M-E3
D1803-M-E3
V2003-M-E3
V2203-M-E3
V2403-M-E3
V2403-M-T-E3
200 Hrs
150 Hrs
Initial
50 Hrs
(1) Oil drain plug