Aastra Telecom 53i IP Phone - Manual (Page 12)

6 Model 53i IP Phone User Guide
Getting Started
For on-hold calls, the timer displays as running and the Line and main
LEDs flash.
When a call is muted, the icon displays as follows.
For muted calls, the handsfree LED flashes and the Mute key LED is ON.
Note: You can use the left and right arrow keys to display the idle or connected
screens on other lines.
Conference State Screens. . .
When you use the Conference key to initiate a conference call, the
following screen displays.
In a conference call, the call timer moves to the left. You use the up and
down arrow keys to scroll to a party on the list. You use the right arrow key
to select the party to drop.
Incomplete Config.
If your phone displays a “No Service” message without any extension or
user name at the end of the start up sequence instead of the Idle State
screen, this means your system administrator has not set up your extension
correctly. Contact your system administrator for assistance.
No Service
When the phone is not properly connected to the network, or the account
has not been configured by the network administrator, the “No Service” or
“Network disconnected” prompt appears on the display and the telephone
status light turns ON. The phone also displays the default time and date of
12:00am Jan. 1st, 2000. Check that the cables are tightly connected to the
phone and to the wall jack. The phone should automatically detect when
the connection is reconnected and will display the “Network Connected”
prompt temporarily.
Call held
03:05
1
John Burns
9054550055
03:00
1
John
Jim 1-1
1-2
= Drop 03:05