Aastra Telecom 53i IP Phone - Manual (Page 38)

32 Model 53i IP Phone User Guide
Programmable Keys
Setting Sprecode Keys
You can set a programmable key to automatically activate specific services
offered by the server. For example, if the sprecode value of *82 is
configured, then by pressing the Sprecode softkey, *82 automatically
activates a service provided by the server. Contact your system
administrator for information about available services.
Use the following procedure to configure a sprecode softkey on the 53i
phone.
1. Click on Operation->Programmable Keys.
2. Select a key from "Key 1" through "Key 6".
3. In the "Hard Key" field, select sprecode.
4. In the "Label" field, enter a label to display on the IP phone for this soft-
key.
5. In the "Value" field, enter the approriate value for accessing specific ser-
vices from the server.
Note: For values to enter in this field, contact your system administrator.
6. Click to save your changes.
7. Click on Operation->Reset.
8. In the "Restart Phone" field click to restart the IP phone.
Aastra Web UI