Aastra Telecom 53i IP Phone - Manual (Page 18)

12 Model 53i IP Phone User Guide
Getting Started
The Network Status window displays for the IP phone you are accessing.
4. You can logout of the Aastra Web UI at any time by clicking Log Off.
The following categories display in the side menu of the Aastra Web UI:
Status, Operation, Basic Settings.
Status
The Status section displays the network status and the MAC address of the
IP phone. It also displays hardware and firmware information about the IP
phone. The information in the Network Status window is read-only.
Operation
The Operation section provides the following options:
- User Password - Allows you to change user password
- Phone Lock - Allows you to assign an emergency dial plan to the
phone, lock the phone to prevent any changes to the phone and to
prevent use of the phone, and reset the user password.
- Programmable Keys - Allows you to configure up to 6 programmable
keys for a specific function (none, line, speeddial, do not disturb
(DND), Busy Lamp Field (BLF), BLF list, flash, Extensible Markup
Language (XML), flash, sprecode, park, pickup, Last Call Return (lcr),
Directory, Callers List, Conference, and Transfer.)
- Directory - Allows you to copy the Callers List and Directory List from
your IP phone to your PC.
- Reset - Allows you to restart the IP phone when required.
Basic Settings
The Basic Settings section provides the following options:
- Preferences - Allows you to enable/disable the following: suppression
of DTMF playback, display of DTMF digits, the playing of call waiting
tone, and stuttered dial tone. This category also allows you to configure
incoming intercom call settings, ring tones (global and per-line basis),
and ring tone sets, time and date settings, and language settings.
- Call Forward - Allows you to set a phone number destination for
where you want calls forwarded. Call forward can be configured using
a specific mode (off, all, busy, no answer, busy no answer) on a global
or per-line basis.