Karcher SB V1 Eco - Manual (Page 23)

– 8
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport it.
Î
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
ƽ
Danger
Risk of injury! The main switch of the vacu-
um cleaner as well as the site-supplied
electrical connection is to be switched off
while carrying out any repairs or mainte-
nance jobs.
Î Open filter door.
Î Replace the flat pleated filter.
Î Close the filter door, it must lock into
place.
External influences or impurities on the
coins can lead to the coin acceptor getting
dirtied over a period of time.
Note:Functional disruption due to bent re-
jection spring. Do not bend the rejection
spring in the coin movement path.
Î Open device door.
Î Pull out the tension spring (1).
Î Remove the plate (2).
Î Clean the coin slot carefully with a
brush and cleaning liquid (for e.g. wash-
ing petrol, spirit).
Note: Do not oil the parts.
Î
Insert the plate (2); in the process, en-
sure that you do not bend the rejection
spring (3) in the coin movement path.
Î Push over the tension spring (1).
Î Clean the exhaust air covers if they are
too dirty or blow them out with com-
pressed air.
Î Clean the casing by thoroughly wiping
the inside and outside with a damp
cloth. After cleaning conserve it with
high grade steel agent (ordering
number: 6.290-911).
Transport
Storage
Maintenance and care
Exchanging the flat pleated filter
Clean coin acceptor
Cleaning the exhaust air covers
Clean and maintain housing
After 80 operating hours or once every
two weeks
23 EN