AMX 8.5" Color Passive LCD Touch Panels - Manual (Page 37)

Programming
33 Color Passive-Matrix LCD Touch Panel
Variable Text Send_Commands
Use variable text Send_Commands to set the borders, fonts, and text.
Color Send_Commands (Cont.)
CTON
Sets the ON feed-
back text color to
the specified
color.
Syntax:
"’CTON<variable text address>-<color _number>’"
Variables:
variable text address = 1 - 255
color number = See the Colors and Programming Numbers table on page 26.
Example:
SEND_COMMAND TP,"’CTON1-72’"
Sets the ON feedback text color to White for variable text button 1.
Variable Text Send_Commands
!B
Sets a specific
button to On or
Off.
Syntax:
"’!B’,<variable text address 1-255>,<ON/OFF 0-1>"
Variables:
variable text address = 1 - 255
ON = 0
OFF = 1
Example:
SEND_COMMAND TP,"’!B’,128, 1"
Sets button 128 Off.
BTOF
Sets a specific
button's active
state to Off.
Syntax:
"’BTOF’,<variable text address>"
Variables:
variable text address = 1 - 255
Example:
SEND_COMMAND TP,"’BTOF’,255"
Sets the state for button 255 to Off.
BTON
Sets a specific
button's active
state to On.
Syntax:
"’BTON’,<variable text address>’"
Variables:
variable text address = 1 - 255
Example:
SEND_COMMAND TP,"’BTON’,128"
Sets the state for button 128 to On.