AMX 8.5" Color Passive LCD Touch Panels - Manual (Page 7)

Installation
3 Color Passive-Matrix LCD Touch Panels
Installation
Mounting the Touch Panel
The following paragraphs describe mounting the Decor and rack-mount touch panels. TiltScreen
touch panels can be placed on any flat surface.
Decor style panels with low-profile Back Boxes
1. Cut out the surface using the dimensions shown in FIG. 1.
2. Carefully insert a flat-blade screwdriver into the release slot on the touch panel's faceplate and
remove the engraved overlay.
3. Place the touch panel into the cutout and mark the screw insert positions as shown in FIG. 1.
4. Remove the touch panel and drill four #6-32 insert holes. Then, place a threaded insert into
each hole.
5. Disconnect the AXlink connector from the Central Controller. Then, disconnect the optional
RS-232 wiring from the external RS-232 device connected to the touch panel.
FIG. 1 Decor style and low-profile Back Box output dimensions