ATI Technologies RADEON X1950 XTX - Manual (Page 15)

Connecting Devices 9
7 Connect the power cable to the 6-pin power connection on the
graphics card.
8 Screw in or fasten the graphics card securely. Make sure the cables
are not interfering with anything inside the computer (for example, a
cooling fan) and replace the computer cover.
9 Reconnect any cables you have disconnected and plug in the
computer’s power cord.
10 Turn on the monitor, and then your computer.
Connecting Devices
The following illustration shows typical connections found on ATI
graphics cards:
L Your computer will beep, possibly show a warning message on your
display, and the boot process will stop if the graphics card is not correctly
connected to the power supply.
Connector Types
VGA Supports an analog CRT monitor.