ATI Technologies RADEON X1950 XTX - Manual (Page 30)

24 Component Video Properties
• A CrossFire ™ Ready motherboard with two PCI Express ® X16
slots.
• A CrossFire ™ Edition Series graphics card.
• An interconnect cable, supplied with the CrossFire ™ Edition
graphics card, connecting the two cards to a single monitor.
Enable Catalyst ™ A.I. to automatically select the preferred rendering mode
for target applications. For applications that are not identified in Catalyst ™
A.I., or when Catalyst ™ A.I. is disabled, default CrossFire ™ rendering
modes are used. In addition, Super Anti-aliasing modes can be directly
enabled in Catalyst
™ Control Center.
For the latest information, see the CrossFire ™ Web page at:
ati.com/crossfire
Component Video Properties
The Component Video Properties aspect of the Catalyst ™ Control Center
adds further support when using the ATI HDTV Component Video
Adapter.
Component Video Properties is made up of:
• Formats
• Avivo™ Color
• Adjustments
• Advanced
Digital Panel Properties
Use the Digital Panel Properties aspect to configure the DVI settings and
Image Scaling to improve image quality without impacting performance.
Use HDTV Support to add EDID information (containing information
about the capabilities of the display) about your connected HDTV display
to the Force button in Displays Manager.
Note: Catalyst ™ Control Center loads aspects dynamically based on
what device is attached to the graphics card. If you have standard
display device such as a CRT monitor or flat panel display Monitor
Properties will appear instead of Digital Panel Properties. The latter
is designed for use with such devices as HDTV displays.