ATI Technologies RADEON X1950 XTX - Manual (Page 22)

16 Monitor Configuration
2 Run the ATISETUP utility. The ATISETUP utility will start
automatically when you insert the ATI Installation CD-ROM into
your optical drive after the operating system has started. If your CD-
ROM auto-run is not enabled or the ATISETUP utility does not start
automatically:
a) Click the Start button in the task bar.
b) Click Run.
c) Select ATISETUP.EXE from the root directory of the ATI
Installation CD-ROM.
d) Click OK.
3 Click Install under Software Install.
4 Click Next.
5 Click Yes to the license agreement. ATI Easy Install will start the
Installation Wizard.
6 Follow the wizard’s on-screen instructions to complete the
installation.
7 When the Setup Complete message appears, select Yes, I want to
restart my computer now and click Finish.
8 After the system reboots, the Found New Hardware message
displays Digital Signature Not Found. Click Yes or Continue to
complete the driver installation.
Monitor Configuration
Once the drivers and software have been installed, you can configure your
monitor.
L The Express installation option is recommended. By selecting this
option, the HydraVision
™ multi-monitor and desktop management
software will automatically be installed, along with the ATI driver. Not
all software components are installed using the Express installation.
Custom installation allows you to select individual software
components for installation.
L Warning - Choosing a refresh rate unsupported by your monitor may
damage your monitor. Consult your monitor’s documentation if
necessary.