Sony MEX-R1 - Manual (Page 17)

17
01GB02CD-EUR.fm masterpage:Right
MEX-R1/MEX-R5
2-581-681-12 (1)
Resuming playback
— Resume play
The unit stores the point where you stopped
playback for up to 20 discs, and starts resuming
playback even after the unit is turned off, or the
disc being played is ejected.
1
During playback, press (OFF) to stop.
2
Press DVD u to resume playback.
Playback starts from the point stopped in
step 1.
To play from the beginning
After setting “MULTI-DISC RESUME” in
“CUSTOM SETUP” to “OFF” (page 31), press
Z to eject the disc, then insert the disc again.
Select the desired chapter on the DVD menu or
the Top menu depending on the disc.
Notes
• MP3 playback will start from the beginning of the last
track that was played.
• To use resume playback, make sure that “MULTI-
DISC RESUME” in “CUSTOM SETUP” is set to
“ON” (page 31).
• When storing a resume point for the 21st disc, the
stored resume point for the 1st disc is cleared
automatically.
• Resume playback is cancelled when the setting for
the parental controls is changed.
• Depending on the disc or scene, you cannot use the
resume playback.
• If parental control is applied, the resume playback
will not work. In this case, playback starts from the
beginning of the disc when it is inserted.
Tip
When CD, MP3 files, or JPEG files are played, the unit
temporarily stores the resume point for the disc being
played. Once the unit is turned off or the disc is
ejected, the stored resume point for the disc is
cleared.
Viewing the disc information
— Time/text information
You can check the playing time and remaining
time of the current title, chapter, or track. You
can also check text information, such as name of
title, chapter, file, etc.
1
During playback, press (DSPL) .
The current playback information appears.
SRC MODE
ATT DVD
SOUND
TOP MENU MENU
SETUP
ENTER
SYSTEM
MENU
LIST
EQ Z × Z DSO
AF
EQ7
PICTURE
AUDIO SUBTITLE ANGLE
OFF
+
–
OFF DVD
u
continue to next page t
AF
AUDIO SUBTITLE ANGLE
TA
CLEAR
1 2 3
4 5 6
7 8 9
0
PTY
DSPL
VOL
+
–
DSPL
T 1:01:57
NO TEXT
Text information *
* “NO TEXT” appears when there is no text
information.
Time information