Sony MEX-R1 - Manual (Page 37)

37
01GB02CD-EUR.fm masterpage:Right
MEX-R1/MEX-R5
2-581-681-12 (1)
Adjusting the equalizer curve
— EQ7 Tune
You can adjust and store the equalizer settings
for different tone ranges.
1
Select a source, then press
(SYSTEM MENU) .
2
Press M / m repeatedly until “EQ7
TUNE” appears, then press (ENTER) .
3
Press < / , repeatedly to select the
desired equalizer type, then press
(ENTER) .
4
Press < / , repeatedly to select the
desired frequency.
The frequency changes as follows:
62Hz y 157Hz y 396Hz y 1kHz y
2.5kHz y 6.3kHz y 16kHz
5
Press M / m repeatedly to adjust the
desired volume level.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 4 and 5 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold (ENTER).
6
Press (ENTER) .
The setting is complete and the display
returns to normal play/reception mode.
Adjusting unit menu items
— SYSTEM MENU
1
Press (SYSTEM MENU) .
2
Press M / m repeatedly until the desired
item appears.
3
Press < / , to select the desired
setting (example: “ON” or “OFF”).
4
Press (ENTER) .
The setting is complete and the display
returns to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
Tip
You can easily switch among categories by pressing
and holding
M / m .
SRC MODE
ATT DVD
SOUND
TOP MENU MENU
SETUP
ENTER
SYSTEM
MENU
LIST
EQ Z × Z DSO
AF
EQ7
PICTURE
AUDIO SUBTITLE ANGLE
OFF
+
–
ENTER
SYSTEM
MENU
M/m
</,
continue to next page t
SRC MODE
ATT DVD
SOUND
TOP MENU MENU
SETUP
ENTER
SYSTEM
MENU
LIST
EQ Z × Z DSO
AF
EQ7
PICTURE
AUDIO SUBTITLE ANGLE
OFF
+
–
ENTER
SYSTEM
MENU
M/m
</,