Sony MEX-R1 - Manual (Page 50)

50
01GB02CD-EUR.fm masterpage:Left
MEX-R1/MEX-R5
2-581-681-12 (1)
Error displays/Messages
The following indications appear when a
malfunction occurs in the unit.
*1 If an error occurs during playback of a CD or MD,
the disc number of the CD or MD does not appear
in the display.
*2 The disc number of the disc causing the error
appears in the display.
On the main unit
BLANK * 1
Tracks have not been recorded on the MD. * 2
t Play an MD with recorded tracks.
ERROR * 1
• The disc is dirty or inserted upside down. * 2
t Clean or insert the disc correctly.
• The disc cannot play because of some
problem.
t Insert another disc.
• The disc is not compatible with this unit.
t Insert a compatible disc.
FAILURE
The speaker/amplifier connection is incorrect.
t See the supplied installation/connections
manual to check the connection.
LOAD
The changer is loading the disc.
t Wait until loading is complete.
L.SEEK +/–
The local seek mode is on during automatic
tuning.
NO AF
There is no alternative frequency for the
current station.
t Press ./> while the station name is
flashing. The unit starts searching for
another frequency with the same PI
(Programme Identification) data (“PI
SEEK” appears).
NO DATA
All custom names have been deleted, or none
are stored.
NO DISC
The disc is not inserted in the CD/MD
changer.
t Insert discs in the changer.
NO ID3
ID3 tag information is not written in the MP3
file.
NO MAG
The disc magazine is not inserted in the CD
changer.
t Insert the magazine in the changer.
NO MUSIC
The disc is not a music file.
t Insert a music CD in this unit or MP3
playable changer.
NO NAME
A track/album/disc name is not written in the
track.
NO TP
The unit will continue searching for available
TP stations.
NOT READ
The disc information has not been read by the
unit.
t Load the disc, then select it on the list.
NOTREADY
The lid of the MD changer is open or the MDs
are not inserted properly.
t Close the lid or insert the MDs properly.
OFFSET
There may be an internal malfunction.
t Check the connection. If the error
indication remains on in the display,
consult your nearest Sony dealer.
READ
The unit is reading all track and album
information on the disc.
t Wait until reading is complete and
playback starts automatically. Depending
on the disc structure, it may take more than
a minute.
RESET
The unit and CD/MD changer cannot be
operated because of some problem.
t Press the RESET button (page 8).
“ ” or “ ”
During fast-forward or reverse, you have
reached the beginning or the end of the disc
and you cannot go any further.
“ ”
The character cannot be displayed with the
unit.
On the monitor
Cannot play this disc.
• The disc is not compatible with this unit.
• The DVD is prohibited for playback due to
the different region code.
No MP3 or JPEG file
The disc contains no MP3/JPEG file.
Read error
• The unit cannot read the data due to some
problem.
• The data is damaged or corrupted.