Sony TDM-BT1 - Manual (Page 13)

13
GB
TDM-BT1 [GB] 3-095-404-11(1)
Troubleshooting
If you run into any problems using this unit, use the following checklist.
Should any problem persist, consult your nearest Sony dealer.
No sound
, Check the connection between
this unit and the stereo audio
output device connected to this
unit.
, Check that both this unit and the
BLUETOOTH stereo audio
source device are turned on.
, Ensure that this unit is not too far
from the BLUETOOTH stereo
audio source device, or this unit
is not receiving interference from
a wireless LAN, other 2.4 GHz
wireless device, or microwave
oven.
, Check that the BLUETOOTH
connection is made properly
between this unit and the
BLUETOOTH stereo audio
source device.
, Turn up the volume of the stereo
audio output device.
, Turn up the volume of the
BLUETOOTH stereo audio
source device as high as possible
to the extent that sound is not
distorted. For details on volume
adjustment, refer to the operating
instructions supplied with the
BLUETOOTH stereo audio
source device.
, Pair this unit and the
BLUETOOTH stereo audio
source device again.
Low sound level
, Turn up the volume of the
BLUETOOTH stereo audio
source device as high as possible
to the extent that sound is not
distorted. For details on volume
adjustment, refer to the operating
instructions supplied with the
BLUETOOTH stereo audio
source device.
, Turn up the volume of the stereo
audio output device.
Distorted sound
, Turn down the volume of the
BLUETOOTH stereo audio
source device to the point where
the sound is no longer distorted.
For details on volume
adjustment, refer to the operating
instructions supplied with the
BLUETOOTH stereo audio
source device.
Sound skips or the
correspondence
distance is short.
, If a device that generates
electromagnetic radiation, such
as a wireless LAN, other
BLUETOOTH device(s), or a
microwave oven is nearby, move
away from such sources.
, Remove any obstacle between
this unit and other BLUETOOTH
device or move away from the
obstacle.