Sony TDM-BT1 - Manual (Page 9)

TDM-BT1 [GB] 3-095-404-11(1)
9
GB
When pairing with a BLUETOOTH stereo audio source device that
cannot display a list of detected devices or that has no display
You may pair the device by setting both this unit and the BLUETOOTH stereo
audio source device to pairing mode. For details, refer to the operating instructions
supplied with the device.
Note
For devices without a display screen the device must have a default pin code of
“0000” to work with the TDM-BT1.
If pairing is not complete
Start over from step 1 .
Note
Passcode of this unit is fixed to “0000”. This unit cannot be paired with a
BLUETOOTH stereo audio source device whose Passcode is not “0000”.
Tip
To pair with other BLUETOOTH stereo audio source devices, repeat steps 1 to 5
for each device.
Connecting
Check “Preparation” (page 7) and “Pairing” (page 7) before operating
the unit.
1
Check to see if the LED status indicator flashes
slowly, indicating connection is possible.
Note
If the LED status indicator turns off, perform the pairing procedure, or press
the OPR button momentarily.
2
Start the BLUETOOTH connection from the
BLUETOOTH stereo audio source device.
3
Start music playback on the BLUETOOTH stereo
audio source device.
Notes
• After connection is complete, the LED status indicator becomes constant.
• Turn off the bass boost function or equalizer function of the BLUETOOTH
stereo audio source device. If these functions are on, sound may be
distorted.
Continued