Adjusting the volume of the subwoofer(s), Adjusting the volume of the bass and treble, 125hz – Sony CDX-C810DSP User Manual

Page 15: 1khz

Advertising
background image

15

Actual total number:

Sony CDX-C810DSP (

E

,F,G,I) 3-856-118-11(2)

EN

DSP

Adjusting the volume of
the subwoofer(s)

1

Press (SOURCE) to select a source (radio,
CD or MD).

2

Press (SOUND) repeatedly until “SUB”
appears.

3

Press (+) or (–) to adjust the volume.
After three seconds, the display goes back
to the normal playback mode.

Adjusting the frequency of the
subwoofer(s)

To match the characteristics of the connected
subwoofer(s), you can cut the unwanted high
and middle frequency signals entering the
subwoofer(s). By setting the cut-off frequency
(see the diagram below), the subwoofer(s) will
output only low frequency signals so that you
can get a clearer sound image.

1

Press (SOURCE) to select a source (radio,
CD or MD).

2

Press (SOUND) repeatedly until “SUB”
appears.

3

Press (SOUND) for two seconds.

4

Press (+) or (–) to select the desired cut-
off frequency.

62 Hz n 99 Hz n 125 Hz* n 157 Hz n 198 Hz

*

Factory-set frequency

5

Press (SOUND) for two seconds.

To adjust volume of the subwoofer, press
(1) (N).

Adjusting the volume of
the bass and treble

— Digital Tone Control

The CDX-C810DSP has a built-in DSP IC that
uses digital processing to create clearer
adjustments to the bass and treble volume than
analog circuits.
The sharper tone slopes used in this unit
produce more obvious and effective tone
responses. For example, you can enhance the
background music with the bass volume and
effectively isolate the main vocals.

1

Press (SOURCE) to select a source (radio,
CD or MD).

2

Press (SOUND) repeatedly until “BAS” or
“TRE” appears.

3

Press (+) or (–) to adjust the volume.
After three seconds, the display goes back
to the normal playback mode.

Adjusting the turn-over frequency

You can adjust the bass and treble turn-over
frequencies.

1

Press (SOURCE) to select a source (radio,
CD or MD).

2

Press (SOUND) repeatedly until “BAS” or
“TRE” appears.

3

Press (SOUND) for two seconds.

Bass adjust mode

Treble adjust mode

continue to next page n

Frequency (Hz)

Level

Cut-off frequency

62

99 125 157 198

Frequency (Hz)

SUR EQ

125Hz

S U B

SUR EQ

157Hz

B A S

SUR EQ

7.1kHz

T R E

Advertising