Sony CDX-C810DSP - Manual (Page 21)

21
Actual total number: Sony CDX-C810DSP ( E ,F,G,I) 3-856-118-11(2)
EN
SUR EQ
PLAY MODE ENTER
--PGM1--
D E L
SUR EQ
PLAY MODE ENTER
NO Data
P 1
SUR EQ
PLAY MODE ENTER
DISC TRACK
4 7 P1.‚8
C D 2
Track slot number
SUR EQ
PLAY MODE ENTER
DISC TRACK
3 2 P1.‚5
C D 2
SUR EQ
PLAY MODE ENTER
DISC TRACK
3 3 P1.‚6
C D 2
SUR EQ
PLAY MODE ENTER
DISC TRACK
4 7 P1.‚6
C D 2
Track slot number
µ
CD/MD Changer
SUR EQ
PLAY MODE ENTER
DISC TRACK
3 2 P1.‚7
C D 2
2
Press (1) (N) repeatedly until “DEL”
appears.
To erase Programme 2, press (4) (n)
repeatedly until “PGM 2” appears.
3
Press (5) (ENTER) for two seconds.
The entire programme is erased.
4
When you finish erasing programmes,
press (3) (PLAY MODE) for two seconds.
Adding tracks to the programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
To select Programme 2, press (4) (n)
repeatedly until “P 2” appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, “*Mem Full*”
appears in the display, and you cannot insert tracks.
5
When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
Erasing the tracks in the
programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
To select Programme 2, press (4) (n)
repeatedly until “P 2” appears.
2
Press (1) (N) or (4) (n) to select the
track you want to erase.
The track currently registered in slot 6 of
Programme 1.
3
Press (5) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (3)
(PLAY MODE) for two seconds.
SUR EQ
PLAY MODE ENTER
DISC TRACK
- -- P1.‚6
D E L