Sony CDX-C810DSP - Manual (Page 20)

20
Actual total number: Sony CDX-C810DSP ( E ,F,G,I) 3-856-118-11(2)
EN
µ
SUR EQ
PLAY MODE ENTER
+ENTER+
P 1
SUR EQ
PLAY MODE
DISC TRACK
3 2 P1.‚2
C D 2
SUR EQ
PLAY MODE ENTER
DISC TRACK
2 3 P1.‚1
C D 2
Creating a programme
— CD Programme Memory (CD changer
with programme memory function)
You can play the tracks in the order you want
by making your own programme. You can
make two programmes: Programme 1 and
Programme 2. You can select up to 12 tracks in
each programme. You can store the
programmes in memory.
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
Programme edit mode
“P 1” shows Programme 1 is selected.
If have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
To select Programme 2, press (4) (n)
repeatedly until “P 2” appears.
2
Select the track you want.
1 Press (SOURCE) repeatedly to select
the changer.
2 Press (SHIFT), then press the number
button to select the disc.
3 Press (SHIFT).
4 Press either side of (SEEK/AMS) to
select the track.
3
Press (5) (ENTER) momentarily.
4
To continue entering tracks, repeat steps
2 and 3.
5
When you finish entering tracks, press
(3) (PLAY MODE) for two seconds.
Notes
• “*Wait*” appears in the display while the unit is reading
the data, or when a disc has not been put into the unit.
• “*Mem Full*” appears in the display when you try to
enter more than 12 tracks into a programme at one time.
Playing the stored programme
Changing the disc order in the changer will not
affect programme memory play.
You can select:
•PGM 1 to play Programme 1.
•PGM 2 to play Programme 2.
•PGM 1+2 to play Programmes 1 and 2.
1
Press (SHIFT).
2
Press (3) (PLAY MODE) repeatedly until
“PGM” appears.
3
Press (4) (n) repeatedly until the
desired programme appears.
z PGM 1 z PGM 2 z PGM 1+2
PGM OFF Z
Programme Play starts.
To go back to the normal playback mode,
select “PGM OFF” in step 3 above.
Notes
• If you press the number button during programme
memory play, programme memory play is interrupted,
and playback of the selected disc starts.
• “NO Data” appears in the display if no track is stored in
the programme.
• If a track stored into the programme memory is not
contained in the disc magazine, the track will be skipped.
• When the disc magazine contains not a single track
stored into the programme memory, or when the
programme information has not been loaded yet, “Not
Ready” appears.
Erasing the entire programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
SUR EQ
PLAY MODE ENTER
DISC TRACK
4 7 P1.‚8
C D 2