Sony CDX-C810DSP - Manual (Page 18)

18
Actual total number: Sony CDX-C810DSP ( E ,F,G,I) 3-856-118-11(2)
EN
Changing the sound and
display settings
You can set:
• AMBER/GREEN to change the illumination
color to amber or green.
• BEEP to turn on or off the beeps.
• DIMMER (Dimmer) to change the brightness
of the display.
• D.INFO (dual information) to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
• LOUD (Loudness) to enjoy bass and treble
even at low volume. Bass and treble will be
reinforced.
• RM (Rotary Remote) to change the operative
direction of the controls of the rotary remote.
— Select “NORM” to use the rotary remote
as the factory preset position.
— Select “REV” when you mount the rotary
remote on the right of the steering
column.
1
Press (SHIFT), then press (2) (SET UP).
2
Press (2) (SET UP) repeatedly until the
desired setting mode appears.
Each time you press (2) (SET UP), the item
changes as follows:
CLOCK n AMBER/GREEN n BEEP n DIMMER
n
D.INFO * n LOUD * n RM
* When you have not tune the station or there is no
CD/MD being played, these items will not appear.
3
Press (4) (n) to select the desired
setting (for example: ON or OFF).
4
Press (SHIFT).
When the mode setting is complete, the
normal playback mode appears.
With Optional Equipment
CD/MD Changer
You can control up to 10 CD changers and MD
changers with this unit.
Playing a CD or MD
Press (SOURCE) until the desired
changer appears.
CD/MD playback starts.
When a CD or MD changer is connected, all
the tracks play from the beginning.
Changing the displayed items
Each time you press (DSPL) during CD/MD
playback, the item changes as follows:
$
Elapsed playback time
$
Disc name* 1
$
Track name* 2
$
Clock* 3
* 1 If you have not labeled the CD, “NO Name” appears in
the display. If there is no prerecorded name for an MD,
“NO D.Name” appears in the display.
* 2 If the track name is not prerecorded, “NO T.Name”
appears in the display for one second.
* 3 If the dual information is on, clock does not appear in
the display.
Tip
If the name of the MD is too long, you can scroll it across
the display window by pressing (SHIFT), then (1) (N).
Automatically scrolling a disc name
— Auto Scroll
The Auto Scroll function automatically scrolls
the disc or track name of the MD when you
press (DSPL) and the name length exceeds 10
characters.
1
Press (SHIFT), then press (2) (SET UP)
repeatedly until “A.SCRL” appears.
2
Press (4) (n) to select “A.SCRL ON.”
To cancel Auto Scroll, select “A.SCRL OFF” in
step 2 above.