Asus AP130-E1 - Manual (Page 43)

2-27 ASUS AP130-E1 barebone server
Back side
The back side of SATA backplane faces the rear panel when installed. This
side includes the power connectors, SATA interfaces for the SATA RAID
card, and SMBus connectors.
SMBus connector
(upper 6-1 pins)
(connects the SMB cable from the motherboard)
Fan connector
(for HDD fan) Power connectors
(connect power plugs
from the power supply)
CON2 CON4 CON6 CON8
Backplane ID Connected to
(on motherboard)
CON2 R-SATA 1
CON4 R-SATA2
CON6 R-SATA2
CON8 R-SATA2
The back side SATA connectors attach
to the motherboard SATA connectors
via the supplied SATA cables. Refer to
the illustration on the left for the
location of the SATA connectors on the
PSCH-L motherboard. Refer to the
table below for the default SATA cable
connections.
R-SATA 2
R-SATA 4
R-SATA 3
R-SATA 1