10 removable components, 1 chassis fan – Asus AP130-E1 User Manual

Page 45

Advertising
background image

2-29

ASUS AP130-E1 barebone server

2.10

Removable components

You may need to remove previously installed system components when
installing or removing system devices, or when you need to replace
defective components. This section tells how to remove the following
components:

1. Chassis fan

4. Power supply module

2. HDD fans

5. Floppy disk drive

3. SATA backplanes

6. Front I/O board

2.10.1 Chassis fan

To remove the chassis fan:

1. Disconnect the 3-pin fan cable

from the connector CHA_FAN1
on the motherboard.

2. Press the tabs on the outer

corners of the system fan, then
pull the fan out of the chassis.

3. Lift the chassis fan case lock

hooks, then push the fan from
the center of the case until it is
detached.

Lock hooks

Advertising