Sony KE-32TS2E - Manual (Page 20)

20
Menu System
AV3 Output The “AV3 Output” option allows you to select the source to be
output from the Scart connector
3/ . You can record from
this Scart any signal coming from the TV or from external
equipment connected to the other Scart connectors.
If your VCR supports SmartLink, this procedure is not
necessary.
To do this:
After selecting the option, press
. Then press or to select
the desired output signal: Auto, TV, AV1, AV2, or AV4.
• If you select Auto, the output signal will always be the
same one that is displayed on the screen.
• If you have connected a decoder to the Scart 3/ or
to a VCR connected to this Scart, please remember to
change back the “AV3 Output” to Auto for correct
unscrambling.
• When AV3 Output is set to Auto, the signal input through
the AV5 input and the RGB signal are not output from the
Scart connector
3/ .
AV3 Input/
AV4 Input/
AV5 Input The “AV3 Input,”“AV4 Input,” and “AV5 Input” options allow
you to select which jack the TV receives the input signal from;
Video or S Video for AV3 Input and AV4 Input, and Component
or RGB for AV5 input.
To do this:
After selecting the option, press
. Then press or to select
the desired jack and finally press OK to store.
RGB Mode Select the “RGB Mode” option if equipment which outputs RGB
signal is connected to the Y/G, P
B
/C
B
/B, P
R
/C
R
/R jacks of the
5.
To do this:
After selecting the option, press
. Then press or to select
the connected equipment:
DTV
for a digital tuner with RGB signal, or Others for other RGB
equipment.
DTV is the digital broadcast format standardised in the
United States, and there are several signal formats, such as
480i, 575i, 480p, 575p, 720p, or 1080i.
S
S
S