Sony KE-32TS2E - Manual (Page 30)

30
Additional Information
Using Optional Equipment
1
Connect your equipment to the designated TV socket, as indicated on page 28.
2
Switch on the connected equipment.
3
To watch the picture of the connected equipment, press the button repeatedly until the
correct input symbol appears on the screen.
4
Press the button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket and select
4 or 4 input signal using the
instructions above. Finally, refer to the “Sound Adjustment” section of this manual and select
“Dual Sound” “A” on the sound menu screen.
Symbol Input Signals
1 or 2 • Audio / video input signal through the Scart connector A.
• RGB input signal through the Scart connector A. This symbol appears only if
a RGB source has been connected.
3 • Audio / video input signal through the Scart connector B.
3 • S Video input signal through the Scart connector B.
4 • Video input signal through the phono socket D and Audio input signal
through C.
4 • S Video input signal through the S Video input jack E and Audio signal
through C.
5 • RGB input signal through the Y/G, P
B
/C
B
/B, P
R
/C
R
/R jacks and HD, VD
jacks H, and Audio input signal through G.
• If your equipment is connected to the Scart connector 3/ , or 4/ 4, or
5 jacks, select the input signal format for the connected equipment by using “AV3
Input,” “AV4 Input,” or “AV5 Input” option in the “Features” menu (page 20).
• If your equipment is connected to the 5 jacks and outputs an RGB signal, select
RGB Mode in the “Features” menu (page 20).
S
S
S S
S