Sony CHC-P33D - Manual (Page 8)

Chapter 2: the CD Player
EN
8
One Touch Play feature
Press CD when the power is off.
You can listen to the CD without pressing
any other buttons when a CD is in the
player.
Automatic Source Selection
If you press CD while you are listening to
other sound source, the CD player is
selected and playback starts automatically.
If there is no CD in the player
“NO DISC” appears in the display. Press
§ OPEN/CLOSE CD to open the disc tray.
Playing Tracks in
Random Order
(shuffle play)
You can play all the tracks on the CD in
random order.
Use the buttons on the unit to do this
operation.
= + 4
1
2
3
1
Press CD.
2
Press § OPEN/CLOSE CD and place a
CD on the disc tray. Then, press §
OPEN/CLOSE CD again to close the
disc tray.
3
Press PLAY MODE repeatedly until
“SHUFFLE” appears in the display.
4
Press (.
“ J ” appears and then all the tracks
play in random order.
To cancel shuffle play
Press PLAY MODE repeatedly until
“SHUFFLE” disappears from the display,
and tracks continue playing in their original
order.
If you press PLAY MODE to display
“SHUFFLE” during normal play
You can play all the tracks on the CD in
random order.
To skip an undesired track
Turn the jog dial clockwise (or press +
on the remote) .
Playing Tracks in the
Desired Order
(programme play)
You can programme up to 32 tracks to play
in any order you choose.
= + 7
4
1
2
5
3
1
Press CD.
2
Press § OPEN/CLOSE CD and place a
CD on the disc tray. Then, press
§ OPEN/CLOSE CD again to close the
disc tray.
3
Press PLAY MODE repeatedly until
“PROGRAM” appears in the display.
4
Turn the jog dial to choose a track.
The track number and the total playing
time appear in the display.
If you want to choose this track, go to
the next step. If not, turn the jog dial
again to choose another track.
5
Press ENTER/NEXT.
The chosen track number and total
playing time appear in the display. If
the track number and the total playing
time disappear before you press
ENTER/NEXT, go back to step 4.
6
Repeat steps 4 and 5 to programme the
remaining tracks you want to play in the
order you want them to play.
7
Press (.
All the tracks play in the order you
chose.
To change the order of programmed
tracks
To change the order, erase the entire
programme and create a new one.
After all the programmed tracks have been
played
The programme order remains stored in the
CD player’s memory, so that you can listen
to the same programme again by just
pressing (.
Note
If “- - . - - ” appears instead of the total
playing time, this means:
•the total programmed time has exceeded
100 minutes, or
•you have programmed a track number
which exceeds 20.
➔ continued
Do this
Press p
Press PLAY MODE
repeatedly until
“PROGRAM”
disappears
Turn the jog dial to
choose a track and
press ENTER/NEXT
Press p once in stop
mode, twice during
play
Track number
Total playing time
To
Stop play
Cancel the
programme play
Programme another
track at the end
Erase the entire
programme