Sony VPL-FX50 - Manual (Page 13)

13
(GB)
Remote Commander
The keys which have the same names as those on the
control panel function identically.
Notes on laser beam
• Do not look into the laser transmitter.
• Do not aim the laser at people.
1 I / 1 key
2 APA (Auto Pixel Alignment) key
3 LENS CONTROL FOCUS/ZOOM/SHIFT keys
4 FREEZE key
Used to freeze the picture projected. To cancel the
freezed picture, press the key again.
5 LASER key
Emits laser beam from the laser transmitter while you
keep this key pressed.
6 Mouse
This functions as the mouse in the INPUT C window
of this projector when the PJ/NETWORK select
switch is set to NETWORK.
7 Arrow keys ( M/m/</,)
8 R (right) CLICK key
When the PJ/NETWORK select switch is set to
NETWORK, this key functions as the right button on
the mouse in the INPUT C window of this projector.
9 ENTER key
Location and Function of Controls
0 FUNCTION 1/2/3 keys
Functions when the PJ/NETWORK select switch is set
to NETWORK.
When the INPUT C window is displayed on the
projector, you can start an application by just pressing
a FUNCTION key. To use this function, allocate an
application to a FUNCTION key. Allocation to the
FUNCTION 3 key is set to the keyboard software
display.
For details on how to allocate an application to the
FUNCTION keys, refer to the Operating Instructions for
Networking.
qa Strap holder
Attaches a strap.
qs CONTROL S OUT jack (stereo minijack)
Connects to the CONTROL S IN jack on the projector
with the connecting cable (not supplied) when using
the Remote Commander as a wired one. In this case,
you do not need to install the batteries since the power
is supplied via the CONTROL S IN jack on the
projector.
qd RESET/ESCAPE key
When the PJ/NETWORK select switch is set to
PJ: Functions as the RESET key.
When the PJ/NETWORK select switch is set to
NETWORK: Functions as the ESCAPE key of
the keyboard when the INPUT C window is
displayed.
qf D ZOOM +/– key
Enlarges the image at a desired location on the screen.
+: Pressing the + key once displays the icon. This
icon indicates the point you want to enlarge. Use
an arrow key (
M/m/</,) to move the icon to
the point to be enlarged. Press the + key
repeatedly until the image is enlarged to your
requirements.
–: Pressing the – key reduces an image that has been
enlarged with the D ZOOM + key.
qg L (left) CLICK key
When the PJ/NETWORK select switch is set to
NETWORK, this key functions as the left button on a
mouse in the INPUT C window of the projector.
qh MENU/TAB key
When the PJ/NETWORK select switch is set to
PJ: Functions as the MENU key.
When the PJ/NETWORK select switch is set to
NETWORK: Functions as the TAB key of the
keyboard when the INPUT C window is
displayed.
+
R
–
1 3
2
ENTER
CLICK
RESET/
ESCAPE
COMMAND
OFF · · ON
PJ · · NETWORK
LENS CONTROL
I /
APA
MENU/
TAB
MUTING
LASER
D ZOOM
FUNCTION
FOCUS ZOOM SHIFT
INPUT PIC FREEZE
1
2
3
4
5
6
7
8
0
9
w;
wa
ws wd
ql
qk
qj
qh
qg
qf
qd
qa , qs