Changing the sound output device, Changing the sound, Output device – Sony SVD13213CYB User Manual
Page 282: User guide, How to use, Troubleshooting list of topics, Vaio duo 13
Personal Computer
VAIO Duo 13
SVD1321
Changing the Sound Output Device
If there is no sound coming from an external device connected to your VAIO
computer, you need to change the device for sound output.
1. Open Control Panel and select Hardware and Sound. (See
2. Select Sound.
3. Select the Playback tab.
4. Ensure there is a check mark next to the icon of the device you intend to
output computer sound from.
If there is no check mark next to the icon, select it and Set Default.
5. Select OK.
To change the sound rate and bit depth
The sound rate and bit depth of the digital audio output signal should be set
according to your digital audio device.
Follow the above steps 1 to 3, and then select the HDMI device or OPTICAL OUT
(optical digital audio output) icon and Properties. On the Advanced tab, select
the sample rate and bit depth (for example, 16 bit, 48000 Hz (DVD quality)) which
the device supports, and then OK.
Related Topic
Connecting External Speakers/Headphones/Headset
Connecting a High-Quality Digital Sound Output Device between Your VAIO
Back Back to Top
© 2013 Sony Corporation
282
Search