Button, User guide, How to use troubleshooting – Sony SVD13213CYB User Manual

Page 419: List of topics

Advertising
background image

User Guide

How to Use

Troubleshooting

Hardware

Apps

Network / Internet

Backup / Recovery

Security

Peripheral Devices

List of Topics

Print

Personal Computer

VAIO Duo 13

SVD1321

What should I do if the screen remains blank when I

press the power button?

Make sure the brightness and contrast controls are adjusted correctly.
An external display may be selected as the display output.
Press the Fn+F7 keys several times to select your desired display output, and
then press the Enter key.
If you are using an external display, make sure it is plugged into an AC outlet
and is on. Make sure the brightness and contrast controls are adjusted
correctly.
Refer to the manual that came with your display for information on how to
change the settings.
Press the Alt+F4 keys several times to close the app window.
An app error may have occurred.
If you wait for a while and the computer screen remains blank, restart your
VAIO computer by following the procedures below in order. Note that following
these procedures may cause working data to become corrupted.

Disconnect all peripheral devices, such as a printer or a USB device, and your

VAIO computer from the network, if any.
Press and hold down the

(Power) button for more than four seconds and make

sure your VAIO computer is off. Then, turn on the computer again.

If the problem persists, reset the battery pack.
Press and hold down the

(Power) button for more than four seconds.

Disconnect all cables connected to your VAIO computer, such as the AC
adapter, and push and hold the battery off button for three to five seconds with
a thin, straight object (such as a paper clip).
Wait about five minutes and then put all cables back in place and turn on the
computer again.
If you bring your VAIO computer directly from a cold location to a warm one, or
use it in a high humidity location, moisture may condense inside the computer.
In such a case, allow at least one hour before turning on the computer.
Do not use the computer in a high humidity location (a relative humidity of
more than 80 %), as it may cause the computer to malfunction.

Go to Page Top

Back Back to Top

© 2013 Sony Corporation

419

Search

Advertising
This manual is related to the following products: