Sony ICD-UX523BLK - Manual (Page 127)

ModelName: ICD-UX522/UX522F/UX523/UX523F
PartNumber: 4-293-033-12
1 1 Troubleshooting
Table of
Cont
ents
Inde
x
Computers
Menu does not reflect the change in settings.
 If the battery is removed just after the menu setting is changed, or the menu setting
is changed using “IC Recorder Setting” of the Sound Organizer software with the
exhausted battery inserted, the menu setting may not function.
A character in a folder or file name is displayed in unreadable characters.
 The IC recorder cannot support or display some special characters and symbols that
are entered on a computer using Windows Explorer or the Macintosh Finder.
It takes a long time to copy a file.
 If the file size of a file is large, it takes a considerable time to finish copying. Wait
until the copying is finished.
The IC recorder is not recognized by your computer. A folder/file cannot be
transferred from your computer.
 Disconnect the IC recorder from your computer and reconnect it.
 Do not use a USB hub or USB extension cable other than supplied USB connection
support cable. Connect the IC recorder directly to your computer or use the
supplied USB connection support cable.
 Operation is not guaranteed if you use any system requirements other than those
described on page 115.
 Depending on the USB port position, the IC recorder may not be recognized. If this
happens, try another port.
The file transferred from your computer cannot be played back.
 The IC recorder can recognize up to 8 levels of folders transferred to the IC
recorder.
 The file format may differ from those that can be played back using the IC recorder
(LPCM(.wav)/MP3(.mp3)/WMA(.wma)/AAC-LC(.m4a)). Check the compatible
file formats ( p. 117).
The computer cannot start.
 If you reboot the computer with the IC recorder connected to the computer, the
computer may freeze or may not start properly.
 Disconnect the IC recorder from the computer and reboot the computer again.