Sony ICD-UX523BLK - Manual (Page 128)

ModelName: ICD-UX522/UX522F/UX523/UX523F
PartNumber: 4-293-033-12
1 1 Troubleshooting
Table of
Cont
ents
Inde
x
FM radio (ICD-UX522F/UX523F only)
No sound comes from the speaker.
 “Audio Output” in the menu is set to “Headphones,” when you are listening to the
radio (ICD-UX522F/UX523F only).
 Set “Audio Output” to “Speaker” ( p. 77).
Sound comes from the speaker even when the headphones are plugged in.
 “Audio Output” in the menu is set to “Speaker,” when you are listening to the radio
(ICD-UX522F/UX523F only).
 Set “Audio Output” to “Headphones” ( p. 77).
The audio is weak or has poor quality when listening to the radio.
 Move the unit away from the TV.
The picture of your TV becomes unstable.
 If you are listening to an FM program near the TV with an indoor antenna, move
the IC recorder away from the TV.
You cannot receive FM radio stations, or a lot of static is heard.
 The headphones are not connected (the headphone cord is the FM antenna)
 Connect the headphones to the  (headphone) jack and extend the headphone
cord.
 “DX/LOCAL” has been set to “LOCAL.”
 Set it to “DX” ( p. 75).
You cannot preset an FM radio station.
 You have already preset 30 FM radio stations.
 Erase unwanted preset stations ( p. 74).
 “Scan Sensitivity” has been set to “Low(SCAN L).”
 Set it to “High(SCAN H)” ( p. 76).