Sony ICD-UX523BLK - Manual (Page 111)

ModelName: ICD-UX522/UX522F/UX523/UX523F
PartNumber: 4-293-033-11
111 111 Additional Information
Table of
Cont
ents
Inde
x
Additional Information
Using a USB AC Adaptor
USB connector of
the IC recorder
USB AC adaptor
(not supplied)
You can charge the rechargeable battery by connecting the IC recorder to an
AC outlet using a USB AC adaptor (not supplied). You can charge the battery
while you are using the IC recorder, so that it is useful when you want to record
for a long time.
When you use the IC recorder for the first time, or after you have not used the
IC recorder for a certain period of time, charge the battery continuously until
“ ” is displayed.
It takes about 3 hours 30 minutes to fully charge an exhausted battery.
*
* This is an approximation for the time it takes to charge from no remaining battery power to full
battery power at room temperature. It varies depending on the remaining power and the
condition of the battery.

Connect a USB AC adaptor (not supplied) to an AC outlet.

Slide the USB DIRECT slide lever on the back of the IC recorder and
connect the USB connector to the USB AC adaptor.
While the battery is charging, the battery indicator is displayed in an
animation.
Now you can use the IC recorder while charging the battery.
Battery indicator
Notes
 While playing back files using the built-in speaker, you cannot charge the battery.
 You cannot charge an LR03 (size AAA) alkaline battery (not supplied).
 During the FM listening and recording, you cannot charge a battery.