Sony ICD-UX523BLK - Manual (Page 23)

  Preparing the Recorder
Table of
Cont
ents
Inde
x
ModelName: ICD-UX522/UX522F/UX523/UX523F
PartNumber: 4-293-033-11
Setting the Clock
You need to set the clock to use the alarm function or record the date and time.
Setting the clock after recharging the battery
, 
 STOP
, 
 /ENTER
When you insert a battery for the first time, or when you insert a battery after
the IC recorder has been without a battery for more than 1 minute, the “Set
Date&Time” animation appears, and then the year section begins to flash in the
clock setting display window.

Set year, month, day, hour and minute.
Press  or  to set the year (the last two digits of the year), and then press
 /ENTER. Repeat this procedure to set month, day, hour, and minute in
sequence.
You can move the cursor to the year, month, day,
hour and minute by pressing  and

.
When you set the minute and press  /ENTER,
the clock reflects the setting.

Press  STOP to return to the stop mode display.