Sony ICD-UX523BLK - Manual (Page 38)

  Recording Files
Table of
Cont
ents
Inde
x
ModelName: ICD-UX522/UX522F/UX523/UX523F
PartNumber: 4-293-033-11
Starting to Record Automatically in Response to
Sound – the VOR Function
MENU
 STOP
 REC/PAUSE
, 
 /ENTER
You can set the VOR (Voice Operated Recording) function to “ON,” to make
the IC recorder start recording when the IC recorder detects sound, and pause
when no sound is heard, eliminating recording during soundless periods.

In the stop or recording mode, select MENU

the
tab

“VOR,” and then press /ENTER.

Press  or  to select “ON,” and then press /ENTER.
“VOR” is set to “OFF” when you purchase the IC recorder.

Press  STOP to exit the menu mode.

Press  REC/PAUSE.
“ ” appears in the display window.
The recording pauses when no sound is detected and “ ” flashes.
When the IC recorder detects sound again, the recording starts again.
To cancel the VOR function
Set “VOR” to “OFF” in step .
Notes
 The VOR function is affected by the sound around you. Set “Mic Sensitivity”
in the menu according to the recording conditions. If recording is not
satisfactory after you have changed the “Mic Sensitivity” setting, or for an
important recording, set “VOR” to “OFF” in the menu.
 During synchronized recording ( p. 40) and the FM recording ( p. 71)
(for ICD-UX522F/UX523F only), the VOR function does not work.