Listening to the fm radio (icd-ux522f/ux523f only), Tuning in an fm radio station, Tuning in a radio station by scanning frequencies – Sony ICD-UX523BLK User Manual
Page 69: Listening to the fm radio, Icd-ux5f/ux5f only), Tuning in a radio station by scanning, Frequencies
Listening to the FM Radio
(ICD-UX5F/UX5F only)
ModelName: ICD-UX522/UX522F/UX523/UX523F
PartNumber: 4-293-033-11
Listening to the FM Radio
(ICD-UX5F/UX5F only)
Tuning in an FM Radio Station
Tuning in a radio station by scanning frequencies
(headphone) jack
/ENTER
,
STOP
MENU
The headphone cord of the supplied stereo headphones works as an FM
antenna, when you listen to the FM radio. Therefore, connect the stereo
headphones to the
(headphone) jack and stretch the cord as long as possible.
When you listening the FM radio with the built-in speaker, connect the stereo
headphones to the
(headphone) jack and stretch the cord as long as possible.
In the sop mode, select MENU
the tab
“FM
Radio,” and then press /ENTER.
The IC recorder enters the FM radio mode.
Select the audio output either from “Headphones” or “Speaker.”
To select the audio output, select MENU
the tab
“Audio Output”
(
p. 77
).
Press or repeatedly to tune in a station.
Press STOP to turn the FM radio off.
To scan radio frequencies automatically
In step , press and hold or until the frequency digits begin to
change on the display. The IC recorder automatically scans the radio
frequencies and stops when it finds a clear station.
If you cannot tune in a station, press or repeatedly to change the
frequency step by step.